期刊文献+

氚增殖剂球床内氦气流动特性的数值模拟

Numerical modeling on helium flow characteristics in tritium breeder pebble bed
下载PDF
导出
摘要 通过计算流体力学(CFD)数值模拟方法,对氚增殖剂球床内部的氦气流动特性进行了初步研究。分析了球床流通长度和流通截面对提氚气体压降的影响,获得了不同入口流速下规则堆积球床和随机堆积球床的压降和阻力系数。 Based on the computational fluid dynamics simulation, the flow characteristics of helium gas in the pebble bed were preliminary investigated. The effect of the channel length of pebble bed and the channel cross section of the pebble bed on the pressure drop of purge gas was analyzed in detail. In addition,the pressure drop and Loss Coefficient of pebble beds with different packing structure at different flow rates were obtained.
作者 程昊 范丽 周冰 巩保平 王晓宇 冯勇进 CHENG Hao;FAN Li;ZHOU Bing;GONG Bao-ping;WANG Xiao-yu;FENG Yong-jin(Southwestern Institute of Physics,Chengdu 610041)
出处 《核聚变与等离子体物理》 CAS CSCD 北大核心 2021年第4期610-616,共7页 Nuclear Fusion and Plasma Physics
基金 国家重点研发计划(2017YFE0300602) 国家自然科学基金(11905047) 四川省科技计划资助(2018JZ0014)。
关键词 氚增殖剂球床 流动特性 压降 阻力系数 Pebble bed of tritium breeder Flow characteristics Pressure drop Loss Coefficient
  • 相关文献

参考文献7

二级参考文献48

  • 1黄青富,詹美礼,盛金昌,罗玉龙,张霞.基于颗粒离散单元法的获取任意相对密实度下级配颗粒堆积体的数值方法[J].岩土工程学报,2015,37(3):537-543. 被引量:16
  • 2冯开明.ITER实验包层计划综述[J].核聚变与等离子体物理,2006,26(3):161-169. 被引量:53
  • 3秦志英,陆启韶.基于恢复系数的碰撞过程模型分析[J].动力学与控制学报,2006,4(4):294-298. 被引量:73
  • 4Boccaccinia L V, Aiello A, Bede O, et al. Present status of the conceptual design of the EU test blanket systems [J]. Fusion Engineering and Design, 2011, 86(6-8): 478-483.
  • 5Daigo Tsuru, Hisashi Tanigawa, Takanori Hirose, et al. Achievements in the development of the water cooled solid breeder test blanket module of Japan to the milestones for installation in ITER [J]. Nucl. Fusion, 2009, 49(6): 065024.
  • 6Seungyon Cho, Mu-Young Ahn, In-Keun Yu, et al. R&D progress of Korean HCSB TBM [J]. Fusion Engineering and Design, 2012, 87(5-6): 386-391.
  • 7Feng K M, Pan C H, Zhang G S, et al. Progress on design and R&D for helium-cooled ceramic breeder TBM in China [J]. Fusion Engineering and Design, 2012, 87(7-8): 1138-1145.
  • 8Dalle Donne M, Sordon G~ Heat-transfer in pebble beds for fusion blankets [J]. Fusion Technology, 1990, 17(4): 597-635.
  • 9Tehranian F, Abdou M A, Tillack M S. Effect of external pressure on particle bed effective thermal conductivity [J]. J. Nucl. Mater., 1994, 212-215: 885-890.
  • 10Tehranian F, Abdou M A. Experimental study of the effect of external-pressure on particle bed effective thermal properties [J]. Fusion Technology, 1995, 27(3):298-313.

共引文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部