摘要
为实现对配电网一二次融合成套设备馈线终端装置(feeder terminal unit,FTU)的测试和控制功能检测,设计一种能够对FTU工作环境进行模拟检测的平台。首先介绍智能化配电网电气设备一次、二次设备深度融合以及对应FTU的实现方法;在此基础上,以DSP和ARM微处理器构建的双CPU架构作为核心,利用硬件、软件相结合的方式,对FTU检测平台进行设计。测试结果表明:设计的检测平台能够对配电网一二次融合成套设备FTU的工作环境进行模拟,并完成FTU的测试。
In order to realize the test and control function of the feeder terminal unit(FTU)of the primary and secondary fusion equipment of the distribution network,a platform capable of simulating the FTU working environment was designed.The article first introduces the deep integration of primary and secondary electrical equipment in the intelligent distribution network and the corresponding FTU implementation method.On this basis,the dual-CPU architecture constructed by DSP and ARM microprocessor is used as the core,and the FTU detection platform is designed by the combination of hardware and software.The test results show that the designed testing platform can simulate the working environment of FTU in the distribution network primary and secondary integration equipment,and complete the FTU test.
作者
王秀茹
代鹏
刘刚
张雪楠
刘帅
蒋宏图
范志杰
WANG Xiuru;DAI Peng;LIU Gang;ZHANG Xuenan;LIU Shuai;JIANG Hongtu;FAN Zhijie(Suqian Power Supply Branch,State Grid Jiangsu Electric Powetr Co.,Ltd.,Suqian 223800,China;Shanghai Wiscom Sunest Power Technology Co.,Ltd.,Shanghai 200233,China)
出处
《中国测试》
CAS
北大核心
2021年第12期163-168,共6页
China Measurement & Test
基金
国网江苏省电力有限公司科技项目(J2019110)。
关键词
配电网
一二次融合
成套设备
馈线终端装置
检测平台
distribution network
primary and secondary fusion
complete equipment
FTU
detection platform