摘要
通过与试验数据进行比对可知,当基材ABS的弹性模量取1000MPa时,利用CAE解析得到的不同膜厚的ABS电镀件弹性模量与试验结果吻合度可达97%左右。该方法能为ABS电镀件在强度、刚度等校核时提供准确可靠的弹性模量值。
By comparing with the test data,when the elastic modulus of ABS substrate is 1000MPa,the elastic modulus of ABS electroplated parts obtained by CAE method is 97%consistent with the test results.This method can provide accurate and reliable elastic modulus value for ABS electroplating parts when checking strength and stiffness.
作者
陈丽军
邱智学
CHEN Lijun;QIU Zhixue(School of Mechanical and Electrical Engineering,Wuyi University,Wuyishan Fujian 354300,China;Agricultural Machinery Intelligent Control and Manufacturing Technology of Fujian Provincial Key Laboratory,Wuyishan Fujian 354300,China;MINTH Group,Ningbo Zhejiang 315800,China)
出处
《佳木斯大学学报（自然科学版）》
CAS
2022年第1期80-82,87,共4页
Journal of Jiamusi University：Natural Science Edition
基金
福建省自然科学基金项目(2020J01396)。
