摘要
通过分析天云选煤厂原煤筛分浮沉资料,开展选煤工艺设计,最终确定分选工艺:300~50 mm块煤智能干选机分选、50~1.0 mm无压三产品重介质旋流器分选、1.0~0.25 mm粗煤泥TBS分选机分选、0.25~0 mm细煤泥压滤回收,并形成了工艺布置方案。
Through analysis and screening of floating and sinking data,development of separation process design,finally,the separation process is determined as follows:300~50 mm block coal intelligent dry separator separation,50~1.0 mm pressure-free three-product heavy medium cyclone separation,1.0~0.25 mm coarse slime TBS separator separation,0.25~0 mm fine slime pressure filtration recovery,the process layout scheme is formed.
作者
仇恒建
QIU Heng-jian(China Coal Xi’an Design Engineering Co.,Ltd.,Xi’an,Shanxi 710054,China)
出处
《煤炭加工与综合利用》
CAS
2021年第11期38-43,共6页
Coal Processing & Comprehensive Utilization
关键词
选煤厂
工艺设计
干选机
无压三产品重介质旋流器
TBS分选机
工艺布置
coal preparation plant
separation process
dry separator
non-pressure three-product dense medium cyclone
TBS separator
process layout