摘要
为适应市场需求、提高传统手工加料的工作效率与安全性,设计了一款以IAP15W4K58S4单片机为控制终端的自动加料机。通过单片机对显示器、电动机等设备的控制,可实现加料过程的自动化。工作人员通过无线遥控器或按键控制加料机的启停,物位传感器实时监测料斗的物位,显示屏实时显示加料机工作状态。当物料超载时,系统发出报警。加料机的动力装置采用两相四线步进电机,驱动蜗杆旋转进料,具有扭矩大的特点。
In order to meet the market demand and improve the efficiency and safety of traditional manual feeding,an automatic feeding machine based on IAP15 W4 K58 S4 microcontroller is designed.It is realized through the control of the display,motor and other equipment by MCU.The worker control feeding machine start or stop through the wireless remote control or button,material level sensor monitor the hopper content,display screen display the working status of feeding machine.When the material overload,the system issued an alarm.The power unit of the feeder adopts two-phase four-line stepping motor to drive the worm to rotate the feed,which has a large torque.
作者
陈云
董阳阳
钱黎明
成亚云
CHEN Yun;DONG Yangyang;QIAN Liming;CHENG Yayun(Nantong Institute of Technology,Nantong 226001)
出处
《现代制造技术与装备》
2021年第12期184-186,共3页
Modern Manufacturing Technology and Equipment
基金
2021年江苏省南通理工学院2021年校级大学生创新创业训练计划立项项目(XDC2021043)。
