一种终端自停自动筛选的研究

Research on a Automatic Screening for Terminal Self-Stop

本文主要研究了对终端自停进行自动筛选的一种方法。按传统运维模式,终端自停需现场检查并在系统标识,效率较低。有别于传统终端运维方式,本文提到的技术措施通过对电表和终端的电压、电流、对应开关的状态进行判断,形成判定依据并输出到计量自动化系统上进行标识,能够极大地提高工作效率,能够在终端运维工作中帮助计量运维人员快速、准确定位真正的故障点,实现精准运维的目的。

This paper mainly studies a method of automatic screening for terminal self-stop.In traditional O&M mode,the automatic shutdown of the terminal requires on-site inspection and identification in the system,which is inefficient.Different from the traditional terminal O&M mode,the technical measures mentioned in this paper can greatly improve the work efficiency by judging the voltage and current of the meter and terminal and the state of the corresponding switch,forming the judgment basis and outputting it to the metering automation system for identification.It can help the metering operation and maintenance personnel quickly and accurately locate the real fault point in the terminal operation and maintenance work,so as to achieve the purpose of accurate operation and maintenance.