摘要
为了衡量某种弹药的毁伤效能,需知某弹体在空间的爆炸位置决定毁伤威力与效果。基于上述要求,设计了空间炸点位置阵列交汇测试系统。采用两个光敏管阵列作为探测装置,利用现场可编程门阵列(FPGA)进行密集并行的高速数据采集。通过实测实验,得出空间炸点位置,表明了系统的可行性和有效性。
In order to measure the damage effectiveness of certain weapon,it is necessary to know the explosive position of projectile in space to determine damage power and effect.Based on the above requirements,a space explosion point position array intersection test system is designed.This system uses two photosensitive tube arrays as detection devices.FPGA is used to carry out dense and parallel high-speed data acquisition.Through actual measurement experiments,the location of the explosion point in space is obtained,which shows the feasibility and effectiveness of the system.
作者
武威兴
赵冬娥
张斌
褚文博
孟凡军
WU Weixing;ZHAO Donge;ZHANG Bin;CHU Wenbo;MENG Fanjun(School of Information and Communication Engineering,North University of China,Taiyuan 030000,China;The 55th Research Institute of China Ordnance Industry Group,Changchun 130000,China)
出处
《传感器与微系统》
CSCD
北大核心
2022年第1期114-116,共3页
Transducer and Microsystem Technologies
基金
国防科工局稳定支持项目。
关键词
光敏管阵列
交汇测量
信号调理电路
现场可编程门阵列
数据采集
炸点位置
photosensitive tube array
intersection measurement
signal conditioning circuit
field programmable gate array(FPGA)
data acquisition
location of explosion point
