摘要
文章通过室内对不同密度非水反应高聚物注浆材料进行冻融循环试验,得到在不同冻融循环条件下材料的抗压强度及抗压损伤度,分析了密度和冻融循环作用次数对高聚物注浆材料抗压性能的影响。结果表明:抗压强度与冻融循环次数、试件密度呈二次多项式回归关系;密度为0.4g/cm^(3)的非水反应高聚物注浆材料受到冻融循环作用的影响最小。
Through the freeze-thaw cycle test,the compressive strength and compressive damage degree of the non-water reacted polymer grouting material with different densities under different freeze-thaw cycles were obtained and the effects of density and freeze-thaw cycles on the compressive performance of polymer grouting materials were analyzed.The test results show that the compressive strength has quadratic polynomial regression relationship with freeze-thaw cycles and specimen density;the non-aqueous reactive polymer grouting material with a density of 0.4 g/cm^(3) is minimally affected by the freeze-thaw cycle.
作者
赵含
钟燕辉
高大鹏
胡郑壕
ZHAO Han;ZHONG Yan-hui;GAO Da-peng;HU Zheng-hao
出处
《内蒙古公路与运输》
2021年第6期1-3,共3页
Highways & Transportation in Inner Mongolia
基金
国家自然科学基金项目(51878622)
河南省杰出青年科学基金项目(202300410354)
吉林省交通科技项目(2016-1-3)。
关键词
高聚物注浆材料
冻融循环
抗压性能
损伤度
回归关系式
polymer grouting material
freeze-thaw cycle
compressive performance
damage degree
regression relationship