期刊文献+

环保型湿气固化聚氨酯热熔胶的制备 被引量:3

Preparation of environmental-friendly moisture-curing polyurethane hot melt adhesive
下载PDF
导出
摘要 以聚醚多元醇、聚酯多元醇、热塑性丙烯酸树脂、异氰酸酯和低分子量聚醚聚合物为主要原料,制备了湿气固化聚氨酯热熔胶。分析了结晶型聚酯多元醇、热塑性丙烯酸树脂和低分子量聚醚聚合物对湿气固化聚氨酯热熔胶性能的影响。研究结果表明:当m(聚酯多元醇7360)∶m(聚酯多元醇7380)=3∶1,w(热塑性丙烯酸树脂Dynacoll AC 1920)=20%,w(低分子量聚醚聚合物HP-270)=8%时,制备的湿气固化聚氨酯热熔胶综合性能良好;低分子量聚醚聚合物对湿气固化聚氨酯热熔胶的耐热性能和耐湿热性能作用明显。 Moisture-curing polyurethane hot melt adhesive was prepared with polyether polyol,polyester polyol,thermoplastic acrylic resin,isocyanate and low molecular weight polyether polymer as main raw materials.The effects of crystalline polyester polyol,thermoplastic acrylic resin and low molecular weight polyether polymer on the properties of moisture-curing polyurethane hot melt adhesive were analyzed as well. The research results showed that:when m(polyester polyol 7360)∶m(polyester polyol 7380)=3∶1,w(thermoplastic acrylic resin Dynacoll AC 1920)=20%,w(low molecular weight polyether polymer HP-270)=8%,the prepared moisture-curing polyurethane hot melt adhesive had good comprehensive performance. The low molecular weight polyether polymer had obvious effect on the heat resistance and moisture-heat resistance of moisture-curing polyurethane hot melt adhesive.
作者 黄先华 林孝蔚 吴海平 向劲松 Huang Xianhua;Lin Xiaowei;Wu Haiping;Xiang Jinsong(Shanghai Hansi Industrial Co.,Ltd.,Shanghai 201103,China)
出处 《中国胶粘剂》 CAS 2021年第12期37-40,48,共5页 China Adhesives
关键词 聚酯多元醇 热塑性丙烯酸树脂 热熔胶 polyester polyol thermoplastic acrylic resin hot melt adhesive
  • 相关文献

参考文献7

二级参考文献50

共引文献43

同被引文献56

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部