摘要
基于国际、国家、行业均未对塑料防滑垫防滑性能的测试方法及防滑等级进行有效规定的现状,采用动态倾斜平台法、静态倾斜平台法对30批次吸盘式聚氯乙烯(PVC)防滑垫进行了测试及防滑等级划分。结果表明,静态倾斜平台法是较为适当的方法,建议静态极限角大于6°。并结合水平拉伸法对吸盘的紧固作用进行了研究,所有样品的吸盘均起到了较好的紧固作用。
Dynamic ramp test and static ramp test were used to investigate and evaluate anti-slip property for 30 batches of polyvinyl chloride(PVC)anti-slip mats with suction cups structure, since there were not relevant authoritative standards available.The results show that static ramp test is appropriate between the above methods, and it is suggested that the static limit angle should be greater than 6°.The suction cups of all the samples show a preferable fastening effect by the investigation with horizontal traction method.
作者
邵曌
吴雪莉
冯一杰
吴映江
张任
肖达
SHAO Zhao;WU Xue-li;FENG Yi-jie;WU Ying-jiang;ZHANG Ren;XIAO Da(Chengdu Institute of Product Quality Inspection and Research Co.,Ltd.,Chengdu 610100,China;National Center for Building Material Quality Supervision and Inspection(Sichuan),Chengdu 610100,China;National Center for Alcohol and Processed Food Quality Supervision and Inspection,Chengdu 610100,China)
出处
《塑料工业》
CAS
CSCD
北大核心
2021年第12期128-132,共5页
China Plastics Industry
基金
成都产品质量检验研究院有限责任公司科研自主立项项目(CQI-ZZ2019K01)。
关键词
防滑垫
吸盘
防滑性能
倾斜平台法
动态
静态
Anti-slip Mats
Suction Cups
Anti-slip Property
Ramp Test
Dynamic
Static