摘要
电站脱硫废水硫酸钙饱和,主要含硫酸镁和氯化钠等组分。本文通过电站脱硫废水现有工艺脱硫废水预处理法和石膏晶种法MED工艺技术研究分析,建议采用石膏晶种法MVR蒸发工艺,供同行参考。
The desulfurization wastewater from power station is saturated with calcium sulfate and mainly contains magnesium sulfate and sodium chloride.In this paper,through the research and analysis of desulfurization wastewater pretreatment method and GYPSUM seed method MED technology,it is suggested to adopt gypsum seed method MVR evaporation process for the reference of peers.
作者
李军
彭赛军
彭敏
Li Jun;Peng Saijun;Peng Min(Hezhongsi(Beijing)Environmental Engineering Co.,Ltd.,Beijing,100026;China Light International Engineering Co.,Ltd.,Beijing,100026;Zigong Light Industrial Design and Research Institute Co.,Ltd.,Zigong,Sichuan,643000;Beijing Salt and Chemical Design Master Studio,Beijing,100026)
出处
《中国井矿盐》
CAS
2022年第1期1-4,共4页
China Well and Rock Salt
关键词
脱硫废水
预处理法MED蒸发工艺
石膏晶种法MED蒸发工艺
石膏晶种法MVR蒸发工艺
Desulfurization wastewater
pretreatment MED evaporation process
gypsum seed method MED evaporation process
gypsum seed method MVR evaporation process