摘要
The effect of the shielding gas composition and the cathode processing history on the weld formation quality during welding with a non-consumable electrode at high current was studied. The major reasons for pores, “waists” and undercuts formation during welding at high currents and speed are discrete melt movement to the solidification front due to the arc decline from the cathode axis and significant melt overhanging in the pool tail part caused by excessive peak pressure on the discharge axis. Cathode flow dispersion causes the lack of displacement of the molten metal which results in its laminar flow in the weld pool, uniform flow of the metal to the crystallization front and sound weld formation. The melt movement in the weld pool and eventually the welded joint quality is determined by the pressure distribution pattern on the welded metal surface and the anode spot lag from the electrode. It was demonstrated that non-consumable electrode configurations that provide arcing with a diffuse cathode spot and increased helium concentration in the inert atmosphere during welding with a conical electrode allow sound weld formation.
基金
supported by the Volgograd State Technical University,in conducting this research study as a part of the state assignment of the Ministry of Science and Higher Education of the Russian Federation(Grant No.0637-2020-0006)。
