期刊文献+

基于分层结构的无线HART调度策略研究

Research on Wireless HART Scheduling Strategy Based on Hierarchical Structure
下载PDF
导出
摘要 采用集中控制通信的思想,提出一种通过图路由方式实现资源调度策略的点对点图路由算法.该算法基于分层结构的基础上采用信号接收强度(RSSI)作为度量选择路由,并提供跳间冗余以确保路由健壮;通过均衡分配信道资源,在网络通信中的所有通信节点之间建立起两点会话.该算法不仅保留了集中式图形路由的可靠性,而且极大地提高了网络通信的抗干扰性. A point-to-point graph routing algorithm for resource scheduling strategy is proposed by using the idea of centralized control communication.Based on the hierarchical structure,signal reception intensity(RSSI)is used as the measure to select routing,and inter-hop redundancy is provided to ensure the robust routing.By balancing channel resources and establishing two-point conversations between all communication nodes in network communication,the algorithm not only retains the reliability of centralized graphical routing,but also greatly improves the anti-interference ability of network communication.
作者 陶亮亮 王庆辉 封岸松 TAO Liang-liang;WANG Qing-hui;FENG An-song(Shenyang University of Chemical Technology,Shenyang 110142,China)
出处 《沈阳化工大学学报》 CAS 2021年第4期374-379,共6页 Journal of Shenyang University of Chemical Technology
关键词 无线HART 图路由 资源分配 wireless HART graph routing resource allocation
  • 相关文献

参考文献6

二级参考文献38

  • 1谢亮,郭阳.基于HART的智能现场实时控制通信系统[J].微计算机信息,2008,24(11):164-165. 被引量:3
  • 2王锦标.现场总线控制系统[J].微计算机信息,1996,12(6):8-16. 被引量:58
  • 3WirelessHART Device Specification. HCF Standard, HCF_SPEC-290, Revision 1.1.
  • 4C8PSK Physical Layer Specification. HCF Standard, HCF_SPEC-60, Revision 1.0.
  • 5TDMA Data Link Layer Specification. HCF Standard, HCF_SPEC-075, Revision 1.1.
  • 6Network Management Specification. HCF Standard, HCF_SPEC-085, Revision 1.1.
  • 7HART Network Management Specification (HCF SPEC-085, Revision 1.0) [S].2007.4.
  • 8HART Wireless Devices Specification (HCF_SPEC-290, Revision 1.0) [S].2007.4.
  • 9HART Wireless Command Specification (HCF_SPEC-155, Revision 1.0) [S].2007.4.
  • 10HART TDMA Data Link Layer (HCF_SPEC-075, Revision 1.0) [S]. 2007.4.

共引文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部