摘要
针对大型桁架天线装配精度的难以预测情况,采用误差等效建模方法建立桁架天线有限元仿真模型,并搭建试验台对仿真模型进行了验证。以仿真结果为基础对影响型面精度的误差因素进行了敏感度分析,通过多元线性回归拟合得到了桁架天线单元体代理模型。采用齐次变换法得到了桁架天线的整体装配误差传递模型。研究结果可为大型桁架天线的零部件设计、装配精度保障及型面精度调整等提供理论支持。
For large truss antenna assembly accuracy is hard to predict,error equivalent modeling method is established by finite element simulation model of truss antenna and is verified to build the simulation model test rig based on the results of simulation factors that affect the precision of profile error sensitivity analysis according to the analysis results through multiple linear regression agent got the unit cell model,Finally,based on the homogeneous transformation method,the whole assembly error transfer model of the truss antenna is obtained.The research results can provide theoretical support for parts design,assembly accuracy assurance and surface accuracy adjustment of large truss antennas.
作者
南凯刚
闫如玉
李光明
房光强
曹争利
吕亮亮
NAN Kaigang;YAN Ruyu;LI Guangming;FANG Guangqiang;CAO Zhengli;LYU Liangliang(Institute of Technology and Education Development,Xi'an Jiaotong University,Xi'an 710049,China;College of Mechanical Engineering,Xi'an Jiaotong University,Xi'an 710049,China;Key Laboratory of Education Ministry for Modern Design and Rotor-bearing System,Xi'an Jiaotong University,Xi'an 710049,China;Space Structure and Mechanism Technology Laboratory,China Aerospace Science and Technology Group Co.,Ltd.,Shanghai 201100,China;Laboratory of Membrane System Deployment,Institute of Aerospace System Engineering Shanghai,Shanghai 201100,China)
出处
《成组技术与生产现代化》
2021年第4期27-36,共10页
Group Technology & Production Modernization
基金
国家自然科学基金资助项目(51805419)
中国博士后科学基金资助项目(2018M631147,2019T120899)。
关键词
桁架天线
有限元分析
代理模型
误差传递
truss antenna
finite element analysis
proxy model
error transfer
