地质矿物的化学物相分析方法研究

Study on chemical phase analysis method of geological minerals

传统的地质矿物的化学物相分析方法中对粒度都没有进行严格地控制,因此在进行化学物相分析的时候结果不够准确,因此提出地质矿物的化学物相分析方法研究课题。实验目的:对地质矿物的化学物相进行分析,实验样品:在贫矿和富集矿中分别提取包括原生矿和氧化矿样品共6种,进行质量分量分析和量值分布分析。实验过程:按照粒度控制标准对矿石进行矿石化学物相分离,并对粒径均小于120μm的样品进行分析,实验结果:样品的平均均匀量为2.02,通过化学物相分析证明,矿石品质均匀。

The particle size is not strictly controlled in the traditional chemical phase analysis methods of geological minerals,so the results are not accurate enough.Therefore,the research topic of chemical phase analysis methods of geological minerals is put forward.Experimental objective:to analyze the chemical phases of geological minerals.Experimental samples:six kinds of samples including primary ore and oxidized ore were extracted from lean ore and enriched ore respectively for mass component analysis and quantity distribution analysis.Experimental process:the ore chemical phase separation is carried out according to the particle size control standard,and the particle size is less than 120 μ M.the experimental results show that the average uniform amount of the sample is 2.02.The chemical phase analysis shows that the ore quality is uniform.