多绳摩擦式提升机提升钢丝绳更换工艺研究

Study on replacement technology of hoisting wire rope of multi rope friction hoist

根据《煤矿安全规程》规定,摩擦式提升机钢丝绳的使用期限不得超过2年,否则存在较大的安全隐患,事故发生率较高,因此,需技术人员按照规定内容,定期更换钢丝绳。矿井提升机主提升机钢丝绳更换工艺专业性强、具有一定危险性,并对技术人员的专业水平要求较高。针对摩擦式提升机钢丝绳的更换,通过研究和探索提出采用旧绳带新绳的施工工艺,通过在实际工作中多次实施和应用,安全高效的完成了提升钢丝绳的更换,并节省了大量劳动力,取得了明显的效果。

According to the coal mine safety regulations,the service life of the steel wire rope of the friction hoist shall not exceed 2 years,otherwise,there will be a large potential safety hazard and a high accident rate.Therefore,it is necessary for technicians to replace the wire rope regularly according to the provisions.The steel wire rope replacement process of the main hoist of the mine hoist is highly professional and dangerous,and requires high professional level of technicians.For the replacement of the steel wire rope of the friction hoist,the construction process of using the old rope and the new rope is proposed through research and exploration.Through multiple implementation and application in practical work,the replacement of the hoisting steel wire rope is completed safely and efficiently,It has saved a lot of labor and achieved obvious results.