期刊文献+

Off-Design Performance of 9F Gas Turbine Based on gPROMs and BP Neural Network Model 被引量:2

原文传递
导出
摘要 Gas turbines are increasingly and widely used,whose research and production reflect a country’s industrial capacity and level.Due to the changeable working environment,gas turbines usually work under the condition of simultaneous changes of ambient temperature,load and fuel.However,the current researches mainly focus on the change in single condition,and do not fully consider the simultaneous change in different conditions.On the basis of single condition,this paper further studies the dual off-design performance of gas turbines under three conditions:temperature-load,fuel-load and fuel-temperature.Firstly,the whole machine model of a gas turbine is established,in which the compressor model has the greatest impact on the performance of gas turbines.Therefore,this paper obtains a more accurate compressor model by combining the engineering modeling advantages of gPROMs and the powerful mathematical calculation ability of MATLAB neural network.Then,according to the established gas turbine model,the dual off-design performance is studied,which is mainly based on the parameter of output and efficiency.The result shows that the efficiency and power output of gas turbines will decrease with the increase of ambient temperature.With the decrease of fuel calorific value,power output and efficiency will increase.As the load decreases,the efficiency of the gas turbines will decrease,and these changes are consistent with the single off-design performance.However,when the fuel and temperature change simultaneously,only adjusting the IGV angle cannot avoid the surge when the temperature is above 30°C.At this time,it is necessary to adjust the extraction rate in order to ensure the safe and stable operation of gas turbines.Therefore,the research on dual off-design performance of gas turbines has an important significance for the peak shaving operation of gas turbines.
出处 《Journal of Thermal Science》 SCIE EI CAS CSCD 2022年第1期261-272,共12页 热科学学报(英文版)
基金 The authors would like to acknowledge for the financial supports from the Fundamental Research Project in Chinese National Sciences and Technology Major Project Grant No.2017-1-0002-0002.
  • 相关文献

参考文献10

二级参考文献46

  • 1李涛,王德慧,李政,任挺进.船用分轴燃气轮机主要部件变工况性能的初步研究[J].汽轮机技术,2004,46(5):365-368. 被引量:5
  • 2张冬阳.压气机特性的系数拟合法[J].燃气轮机技术,1993,6(3):27-32. 被引量:13
  • 3徐钢,林汝谋,邵艳军,金红光.燃气轮机建模的通用性和精细性研究[J].中国电机工程学报,2005,25(21):106-111. 被引量:24
  • 4张娜,林汝谋,蔡睿贤.压气机特性通用数学表达式[J].工程热物理学报,1996,17(1):21-24. 被引量:25
  • 5崔茂佩.大连理工大学硕士学位论文·第四章[M].-,1996,3..
  • 6黄钟岳.船用燃气轮机总体设计CAD软件研制报告[M].-,1996,5..
  • 7HENRIKSSON M, BORGUET S, LEONARD O, et al. On Inverse Problems in Turbine Engine Parameter Estimation [C]//Proceedings of the ASME, Montreal: Amer Soc Mechanical Engineers, 2007:703-711.
  • 8Cohen H, Rogers G F C, Saravabanyttoo H I H. Gas Turbine Theory [M]. 4th ed. London: Addison Wesley, Longman, 1996:148-152.
  • 9Kays W M, London A L. Compact Heat Exchangers [M]. 3 ed. New York: McGraw-Hill Book Company, 1984:11-29.
  • 10Agarwal H, Kale A, Akkaram S, et al. Inverse Modeling Techniques for Application to Engine Transient Performance Data Matching [C]//proceedings of the ASME. Berlin: Amer Soc Mechanical Engineers, 2008:207-214.

共引文献91

同被引文献26

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部