期刊文献+

QTD 1050-6材料的低温性能研究

Study on Low Temperature Properties of QTD 1050-6 Material
下载PDF
导出
摘要 以QTD1050-7材料为研究对象,研究了该材料的低温力学性能。结果表明,与常温下的力学性能对比,低温条件下,该材料的力学性能变化较大,但仍具有良好的综合力学性能。在-20℃时,抗拉强度提高了6.85%,伸长率为7.40%,下降了12.63%,冲击功为74 J,下降了20.43%;在-60℃时,相对于常温条件抗拉强度提高8.39%,伸长率下降29.04%,冲击功下降了66.67%;在-60℃时,硬度变化幅度相对较小,硬度最高,比常温提高了8.48%。 The low temperature mechanical properties of QTD 1050-7 were studied. The results show that compared with the mechanical properties at room temperature, the mechanical properties of the material change greatly at low temperature,but it still has good comprehensive mechanical properties. At-20 ℃, the tensile strength increases by 6.85%, the elongation is 7.40%, and the impact energy decreases by 12.63% at 74 J. At-60 ℃, the tensile strength increases by 8.39%, the elongation decreases by 29.04%, and the impact energy decreases by 66.67%. At-60 ℃, the range of hardness is relatively small and the hardness is the highest, which is 8.48% higher than that at room temperature.
作者 郑言彪 张军 齐基 文宏 金志平 ZHENG Yanbiao;ZHANG Jun;QI Ji;WEN Hong;JIN Zhiping(Hubei Mechanical and Electrical Research and Design Institute Co.,Ltd.,Wuhan 430000,China)
出处 《铸造技术》 CAS 2021年第12期1013-1016,共4页 Foundry Technology
基金 湖北省科技厅科技专项(2020-205-030-002)。
关键词 ADI 低温性能 抗拉强度 伸长率 ADI low temperature performance tensile strength elongation
  • 相关文献

参考文献5

二级参考文献27

共引文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部