摘要
针对某铅锌尾矿嵌布粒度细、氧化程度高、泥化严重的问题,进行了一系列浮选试验研究。采用硫化混合浮选的工艺流程,经过一粗五精三扫浮选,在磨矿细度-0.074 mm含量占95%条件下,选取最优参数进行闭路实验,最终获得铅品位15.05%、回收率为34.31%,锌品位39.23%、回收率为49.82%的铅锌混合精矿。
A series of flotation test were carried out on the lead and zinc tailings with fine particle size,high oxidation and serious modification.When the grinding fineness of-0.074 mm accounts for 95%,the optimal parameters are selected for two roughing,four cleanings and three scavenging closed-circuit sulfide-mixed flotation experiment.The mixed lead and zinc concentrate with lead grade of 15.05%,zinc grade of 39.23%,lead recovery of 34.31%and zinc recovery of 49.82%was obtained.
作者
胡蝶
赖俊全
李雨晴
蓝鹏宇
吴彩斌
HU Die;LAI Jun-quan;LI Yu-qing;LAN Peng-yu;WU Cai-bin(School of Resources and Environmental Engineering,Jiangxi University of Science and Technology,Ganzhou 341000,Jiangxi,China;Jiangxi Key Laboratory of Mining Engineering,Ganzhou 341000,Jiangxi,China)
出处
《矿冶》
CAS
2022年第1期12-18,共7页
Mining And Metallurgy
关键词
混合浮选
氧化铅锌尾矿
细粒级
mixed flotation
lead-zinc oxide tailings
fine grained