Performance study of a novel sampling TPC prototype detector based on THGEM

Introduction Time projection chamber(TPC)with micropattern gaseous detectors(MPGDs)as readout has been one of the research hotspots in recent years.MPGD-based TPC has been applying to many experiments due to its high spatial and energy resolutions in 3D track measurement.Purpose A novel sampling TPC detector based on thick gaseous electron multiplier(THGEM)was developed to measure the low-energy electron tracks online from 0.1 to 50 MeV with a 100μm spatial resolution in a vacuum tank.The tracks will be extrapolated to determine the hit positions on a target about 200mm behind the TPC.Methods and materials A new type of self-developed THGEM detector was chosen as the TPC readout unit.The field cage has two 50×50mm2 windows welded by Gold-plated tungsten wires for low-energy electrons passing through.The front-end electronics was designed with a self-developed application specific integrated circuit chip,i.e.,CASA-GEM.Seven columns of readout pads were used to equidistantly sample the electron tracks in a length of 75mm.Each column has 72 pads of 0.56×0.56mm2 and two additional strips along each column for drift time measurement.Both Geant4 and Garfield++were chosen to simulate and optimize the detector,such as the penetration efficiency,electric field in field cage and operating gas pressure.Results The design and the preliminary performances of the TPC detector were verified by beam test andβsource test.A drift velocity of 3.415±0.103 cm/μs was measured at 125 V/cm in Ar+iC4H10(97:3)forπ−.The electron detection efficiency is about 88%forβsource.And the gain of the double THGEM reached more than 1.0×10^(4).