期刊文献+

钢铁企业电力需量综合优化分析及措施

Analysis on Comprehensive Optimization of Power Demand by Iron&Steel Enterprises and Countermeasures for Reduction of Power Demand
下载PDF
导出
摘要 分析了鞍钢股份有限公司鲅鱼圈钢铁分公司的供电系统组成,建立了电力需量决策分析系统,制定了需量控制统筹方案。以检修为例,根据检修计划对能源介质、发电量、生产工艺负荷等数据进行再分析以调整统筹方案,并建立了电力需量控制数学模型。该模型使用后,月均基本电费降低464万元。 The components in terms of the power supply system in Bayuquan Branch of Angang Steel Co.,Ltd.were analyzed.And then the decision analyzing system on power demand was established while the plan in entirety for controlling power demand was determined.Taking the maintenance for power system as a scheduled example in overhauling,the plan in entirety for controlling power demand was adjusted after such data as energy medium,generated energy,production process load were reanalyzed according to the maintenance plan and then the mathematical model for controlling the power demand was established.After the model was put into use,the basic electricity cost per month on the average was reduced by 4.64 million yuan RMB.
作者 詹守权 刘迎宇 徐强 孟志权 阚颂 郝飞 ZHAN Shouquan;LIU Yingyu;XU Qiang;MENG Zhiquan;KAN Song;HAO Fei(Bayuquan Branch of Angang Steel Co.,Ltd.,Yingkou 115007,Liaoning,China;NR Electric Co.,Ltd.,Nanjing 211102,Jiangsu,China)
出处 《鞍钢技术》 CAS 2022年第1期65-70,共6页 Angang Technology
关键词 钢铁企业电力需量 能源介质 发电量 生产工艺负荷 power demand by iron&steel enterprises energy medium generated energy production process load
  • 相关文献

参考文献6

二级参考文献34

  • 1王金祥,沈军.基于成本分析的自发电负荷优化方法研究与应用[J].冶金动力,2012(4):1-4. 被引量:2
  • 2和识之.电网智能调度模式及框架设计[J].云南电业,2010(5):37-38. 被引量:1
  • 3王治国,刘吉臻,谭文,杨光军.基于快速性与经济性多目标优化的火电厂厂级负荷分配研究[J].中国电机工程学报,2006,26(19):86-92. 被引量:67
  • 4国家电监会.四大因素今夏电力供应形势严峻[EB/OL]. ( 2008-06-05 ) [ 2008-08-19 ]. http://www.serc.gov. cn/xyxx/zhxx/200806/t20080605_9562.htm.
  • 5马丁,沈仁.均衡负荷节约电能缓解缺电的有效途径[C]//节能创想2006-首届全国电气节能大赛论文集.2006.
  • 6殷瑞珏.冶金流程工程学[M].北京:冶金工业出版社,2004.
  • 7Kirschen D S.Demand-side view of electricity markets[J].IEEE Trans.On Power Systems,2003,18(2):520-527.
  • 8Billinton R,Lakhanpal D.Impacts of demand-side management on reliability cost/reliability worth analysis[J].IEE Proceedings of Gener.Trans.And Distri.,1996,143(3):225-231.
  • 9International Electrotechnical Commission. IEC61970 TC53 Energy Management System Application Program Interface (EMS-API) Part 301 : Common Information Model (CIM) Base S 1. Geneva, Switzerland: IEC, 2003.
  • 10International Electrotechnical Commission. IEC61970 TC53 Energy Management System Application Program Interface (EMSAPI) Part 302 : Common Information Model (CIM) Financial, Energy Scheduling, and Resel- wation [ S ]. Geneva, Switzerland : IEC, 2003.

共引文献36

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部