摘要
合建建筑的消火栓用水量、消防水箱容积、自动灭火系统设置范围等在各消防规范中没有对应的条文直接作为设计依据,造成建筑给排水行业执行规范时,消防设施配置以及消防给水系统设计参数出现较大的差异。通过分析几类典型合建建筑物的项目特点及其建筑防火措施等,根据规范并按工程设计原理提出相应的处理意见。
There have not been corresponding provisions in the fire code directly as a design basis for fire flow rates of hydrant,volume of fire tank,setting scope of fire fighting facility,etc.currently.Therefore,greatly differences for the fire fighting facilities and the design parameters of fire protection water supply system will be caused during the code implementation.The corresponding treatment suggestions are put forward according to the code and the principle of engineering design based on the analysis of the characteristics of several typical joint buildings and their fire prevention measures.
作者
王仁华
田沁禾
黄显奎
钟文泉
周玲玲
刘智刚
韦峰
WANG Ren-hua;TIAN Qin-he;HUANG Xian-kui;ZHONG Wen-quan;ZHOU Ling-ling;LIU Zhi-gang;WEI Feng(CMCU Engineering Co.Ltd.,Chongqing 400039,China;Chongqing Architecture Design Institute Co.Ltd.,Chongqing 400015,China;CCTEG Chongqing Research Institute Co.Ltd.,Chongqing 400016,China;Chongqing Yuzhou Engineering Survey and Design Technical Service Center,Chongqing 400016,China;Nanning Institute of Architecture Design Co.Ltd.,Nanning 530023,China)
出处
《中国给水排水》
CAS
CSCD
北大核心
2022年第2期30-33,共4页
China Water & Wastewater
关键词
合建建筑
室外消火栓流量
消防水箱容积
消防设施
joint buildings
fire flow rates of outdoor hydrant
volume of fire tank
fire fighting facility