摘要
在分析质子交换膜燃料电池控制系统功能需求的基础上,基于MC9S12XEP100单片机完成了控制器的硬件设计,包括可配置多功能模拟信号采集、低边驱动、电机驱动、CAN通讯等功能。将开发的控制器用于实际燃料电池的运行控制,结果表明开发的控制器运行稳定,能够精确控制各参数,满足燃料电池运行控制的要求。
On the basis of analyzing the functional requirements of PEMFC control system,the hardware design of the controller is completed based on MC9S12XEP100 MCU,including configurable multi-function analog signal acquisition,low side drive,motor drive,CAN communication and other functions.The developed controller is applied to the operation control of the actual fuel cell,and the results show that the developed controller runs stably,can accurately control the parameters,and meets the requirements of the fuel cell operation control.
作者
赵同军
马荣泽
纪少波
刘振革
陈忠言
刘飞
李洋
程勇
Zhao Tongjun;Ma Rongze;Ji Shaobo;Liu Zhenge;Chen Zhongyan;Liu Fei;Li Yang;Cheng Yong(School of Energy and Power Engineering,Shandong University,Jinan City,Shandong Province 250061,China;Shandong Technician Institute,Jinan City,Shandong Province 250200,China;Shandong Hydrogen Exploration New Energy Technology Co.,Ltd.,Jinan City,Shandong Province 250014,China)
出处
《农业装备与车辆工程》
2022年第3期15-19,24,共6页
Agricultural Equipment & Vehicle Engineering
基金
山东省重点研发计划(2019GGX103042)
运输车辆检测、诊断与维修技术交通行业重点实验室开放课题(JTZL1901)。
