摘要
采用氢化脱氢(hydrogenation-dehydrogenation,HDH)工艺制备不规则形状Nb521合金粉末,结合流化技术将氢化脱氢粉末进行改性处理,改善粉末球形度及流动性,所制流化Nb521合金粉末基本满足3D打印的工艺要求。通过X射线衍射(X-ray diffraction,XRD)分析、扫描电子显微镜(scanning electron microscope,SEM)观察、粒度分析、化学分析等手段,对粉末形貌、粒度分布、间隙元素含量、球形率以及流动性等特性进行表征。结果表明,经流化处理后,不规则形状的氢化脱氢Nb521合金粉末粒度分布变窄,球形率和流动性均得到显著提高,杂质元素含量得到有效控制,3D打印过程中的铺粉效果良好。
The irregular-shaped hydrogenation-dehydrogenation(HDH)Nb521 alloy powders were modified by fluidization to improve the sphericity and flowability in this study.The fluidized Nb521 powders basically met the requirements of 3D printing.The powder morphology,particle size distribution,interstitial element content,sphericity,and flowability were characterized and analyzed by X-ray diffraction(XRD),scanning electron microscope(SEM),particle size analysis,and chemical analysis.The results show that,the particle size distribution of the irregular-shaped HDH Nb521 alloy powders becomes narrow after the fluidization,the sphericity and flowability are significantly improved,while the impurity level is effectively controlled.The spreading performance of the fluidized Nb521 powders during 3D printing exhibits quite well.
作者
陈佳男
丁旺旺
朱科研
陈刚
曲选辉
CHEN Jia-nan;DING Wang-wang;ZHU Ke-yan;CHEN Gang;QU Xuan-hui(Institute for Advanced Materials and Technology,University of Science and Technology Beijing,Beijing 100083,China;Beijing Advanced Innovation Center for Materials Genome Engineering,University of Science and Technology Beijing,Beijing 100083,China)
出处
《粉末冶金技术》
CAS
CSCD
北大核心
2022年第2期126-130,共5页
Powder Metallurgy Technology
基金
国家自然科学基金资助项目(51971036)
山东省重点研发计划资助项目(2019JZZY010327)。
关键词
Nb521合金
3D打印
氢化脱氢
粉体改性
流动性
Nb521 alloys
3D printing
hydrogenation dehydrogenation
powder modification
flowability