Highly dispersed nickel boosts catalysis by Cu/SiO_(2) in the hydrogenation of CO_(2)-derived ethylene carbonate to methanol and ethylene glycol

The efficient hydrogenation of CO_(2)-derived ethylene carbonate(EC)to yield methanol(MeOH)and ethylene glycol(EG)is a key process for indirect conversion of CO_(2)to MeOH.However,a high H_(2)/EC molar ratio during the hydrogenation process(usually as 180-300)is generally required to achieve good catalytic performance,resulting in high cost and energy consumption for H_(2)circulation in the promising industrial application.Here,we prepared a series of Ni-modified Cu/SiO_(2)catalysts and explored the effects of synthesis methods and Ni contents on catalytic performance under different H_(2)/EC molar ratios.The Cu/SiO_(2)catalyst with 0.2%(mass)Ni loading prepared by co-ammonia evaporation method exhibited above 99%conversion of EC,91%and 98%selectivity to MeOH and EG respectively at H_(2)/EC ratio of 60.And no significant deactivation was observed within 140 h at a lower H_(2)/EC of 40.It is demonstrated that a few of Ni addition could not only promote Cu dispersion and increase surface Cu^(+) species due to the strong interaction between Cu and Ni species,but also form uniformly-dispersed CuNi alloy species and thus enhance the adsorption and dissociation of H_(2).But the excess Ni species would aggregate and segregate to cover partial surface of Cu nanoparticles,leading to a significantly drop of catalytic performance in EC hydrogenation.These insights may provide guidance for further design of catalysts for the ester hydrogenation reactions.