电力信息通信设备远程重启装置的研制

Development of Remote Restart Device for Power Information Communication Equipment

随着我国经济的快速发展,为电力信息通信设备发展提供了强有力的外部支持,文章就电力系统的安全控制及自动化设备进行论述,旨在为实现电力信息通信设备远程重启提供参考。维保经验表明,解决通信管理机死机故障的最有效方法就是重启,但是该方法排除故障效率较低,因维修人员未及时进入现场极有可能延误最佳维修时机,在通道信号故障期间极易出现设备事故。为了解决这一难题,需要科研人员在电力信息监控系统电源装置上安装远程重启装置,当出现故障后,重启装置立即工作,恢复电力通信管理机运行,实现无人重启和通道信号传输,避免出现供电设备无人监控的情况。

With the rapid development of China's economy,it provides strong external support for the development of power information communication equipment.This paper discusses the security control and automation equipment of power system,in order to provide direction for the remote restart of power information communication equipment.Maintenance experience shows that the most effective way to solve the crash fault of communication management machine is to restart.However,this method has low troubleshooting efficiency.Because the maintenance personnel do not enter the site in time,it is very likely to delay the best maintenance opportunity,and equipment accidents are very likely to occur during channel signal failure.In order to solve this problem,researchers need to install a remote restart device on the power supply device of the power information monitoring system.In case of failure,the restart device will work immediately to restore the power communication management machine,realize unmanned restart and channel signal transmission,and avoid the situation of unmanned monitoring of power supply equipment.