摘要
为实现合成氨系统的提效增产,以某6万t/a费托油蜡联产12万t/a液氨项目为依托,介绍了焦炉气制费托油蜡联产液氨工艺流程及合成氨装置的提效改造情况。通过新增精脱硫至尾气转化管线,合成氨开车时间缩短约20 d,油氨联产全流程开车时间缩减至10 d;将两台富氮空气压缩机中的一台改造为纯氮气压缩机,直接将纯氮气送至氨合成工序,实现增产液氨1.25 t/h。
In order to improve the efficiency and increase the ammonia production,based on a 60000 t/a Fischer-tropsch oil wax co-generation of 120000 t/a liquid ammonia project,the process of co-production of coke oven gas to Fischer-tropsch oil wax and synthetic ammonia and the renovation for efficiency improvement of synthetic ammonia were briefly introduced.By adding a new pipeline from fine desulfurization to tail gas conversion,the ammonia start-up time was shortened by about 20 days,and the start-up time of the whole process of oil ammonia co-generation was shortened to 10 days;in addition,one of the two nitrogen enriched air compressors was transformed into a pure nitrogen compressor,which could directly send the pure nitrogen to the ammonia section,increasing the output of liquid ammonia by 1.25 t/h.
作者
孟华平
石震宇
Meng Huaping;Shi Zhenyu(Lu′an Chemical Group Co.,Ltd.,Changzhi Shanxi 046000,China;Tianji Group Engineering Co.,Ltd.,Changzhi Shanxi 047507,China)
出处
《煤化工》
CAS
2022年第2期61-63,共3页
Coal Chemical Industry
关键词
焦炉气
合成氨
费托合成
补氮
开车时间
提效改造
coke oven gas
ammonia
Fischer-tropsch synthesis
nitrogen-feeding
start-up time
renovation for efficiency improvement