江苏某化工园区工业污水处理综合提升项目工艺可行性研究

Process Feasibility Study on Comprehensive Upgrading Project of Industrial Wastewater Treatment in Jiangsu Chemical Park

为积极响应江苏省人民政府的要求,江苏某化工园区现有污水处理急需进行提标升级改造以满足新的排放标准要求。本文以该化工园区污水厂调节池污水为研究对象,经过2个月的实验验证,发现采用“多元协同高效臭氧催化氧化+A2/O+高效低耗臭氧催化氧化”的主工艺处理该污水厂接管废水在技术上是可行的,出水COD浓度可降至45 mg/L以下,即使在恶劣水质冲击下,通过末端颗粒活性炭吸附能稳定出水,可以保证最终出水COD稳定达到《GB 18918—2002》一级A标准。

In order to actively respond to the requirements of the Jiangsu Provincial People's Government,the existing sewage treatment in a chemical park in Jiangsu urgently needs to be upgraded and upgraded to meet the new emission standards.This thesis takes the sewage from the regulating pond of the sewage plant in the chemical park as the research object.After two months of experiments,the main process of“multiple synergistic high-efficiency ozone catalytic oxidation+A2/O+high-efficiency and low ozone depletion catalytic oxidation”is used to treat the wastewater from the sewage plant.It is technically feasible.The effluent COD concentration can be reduced to less than 45 mg/L.Even under the impact of bad water quality,the effluent can be stabilized by the adsorption of granular activated carbon at the end,which can ensure that the final effluent COD stably reaches the“GB18918—2002”Class A standard.