摘要
运用Anycasting软件并采用正交试验的方法对铝合金发火座的浇注温度、浇注速度和模具预热温度进行了优化。分析了不同条件下合金的充填和凝固,预测了缩松、缩孔的位置及大小。结果得出,在浇注温度630℃、浇注速度40 mm/s、模具预热温度220℃时,铝合金发火座的缩松、缩孔缺陷最小。
The pouring temperature, pouring speed and mold preheating temperature of the aluminum alloy ignition seat were optimized by using the Anycasting software and the orthogonal casting method. The filling and solidification under different conditions were analyzed, and the position and size of the casting shrinkage cavity and porosity positions were predicted. The results show that when the pouring temperature is 630℃, the pouring speed is 40 mm/s, the mold preheating temperature is 220℃, the shrinkage and shrinkage defects of aluminum alloy ignition seat are the least.
作者
王豆丰
程凯
李成信
袁林
陈曦
曾华成
朱春明
陈颖琳
谷成渝
谢洪权
周志明
WANG Doufeng;CHENG Kai;LI Chengxin;YUAN Lin;CHEN Xi;ZENG Huacheng;ZHU Chunming;CHEN Yinglin;GU Chengyu;XIE Hongquan;ZHOU Zhiming(School of Materials Science and Engineering,Chongqing University of Technology,Chongqing 400054,China;Chongqing Chang'an Industry(Group)Co.,Ltd.,Chongqing 401120,China;Chongqing Yujiang Die-Casting Co.,Ltd.,404000,China;Jiangsu Xianghe Electronic Technology Co.,Ltd.,Xuzhou 221214,China)
出处
《热加工工艺》
北大核心
2022年第7期82-85,共4页
Hot Working Technology
基金
重庆市技术创新与应用产业类项目(cstc2019jscx-fxydX0072,cstc2019jscx-mbdxX0025,cstc2019jscx-zdztzxX0003,cstc2019jscx-zdztzxX0044)
江苏省高层次双创人才计划(2016A359)。