期刊文献+

某型测试设备改装技术研究 被引量:3

Study on the Retrofit Technology for a Certain Type of Test Equipment
原文传递
导出
摘要 为满足某型新装导弹地面检测和维护保障要求,对某型测试设备进行改装,增加对新装型导弹的检测功能,满足维护保障需要。本文研究的重点在于如何实现对该型测试设备的改装,以满足导弹检测需求。
作者 潘水 郭成统
出处 《航空维修与工程》 2022年第4期53-56,共4页 Aviation Maintenance & Engineering
关键词 改装技术 功能扩展 串口通信 retrofit technology function expansion serial communication
  • 相关文献

参考文献2

二级参考文献11

  • 1徐勇,王志功,关宇,乔庐峰,赵斐.一种高精度带隙电压基准源改进设计[J].Journal of Semiconductors,2006,27(12):2209-2213. 被引量:5
  • 2郑儒富,俞永康.一种4ppm/℃曲率补偿CMOS带隙基准源[J].微电子学,2007,37(1):101-104. 被引量:8
  • 3BASSO Christophe.The TL431 in switch-mode power supplies loops:part I[J].Electronic Design Application,2009,3:99-102.
  • 4Texas Instruments.TLV431 datasheet[R].USA:Texas Instruments,2000.
  • 5GUNAWAN M,MEIJER C,FONDERIE J.A curvature-corrected low-voltage bandgap reference[J].IEEE Journal of SolidState Circuits,1993,28:667-670.
  • 6SONG B S,GRAY P R.A precision curvature-compensated CMOS bandgap reference[J].IEEE Journal of Solid-state Circuits,1983,18(6):634-643.
  • 7RINCON-MORA Gabriel Alfonso.Voltage references:from diodes to precision high-order bandgap circuits[M].USA:Wiley&Sons,2000.
  • 8LEE I,KIM G,KIM W,et al.Exponential curvature-compensated BiCMOS bandgap references[J].IEEE Journal of SolidState Circuits,1994,29(11):1396-1403.
  • 9GUPTA V,RINCóN-MORA G A.Predicting the effects of error sources in bandgap reference circuits and evaluating their design implications[J].Circuits and Systems,2002,3:575-578.
  • 10GUPTA V,RINCóN-MORA G A.Predicting and designing for the impact of process variations and mismatch on the trim range and yield of bandgap reference[C]//Proceedings of Sixth International Symposium on Quality of Electronic Design.[S.l.]:ISQED,2005:503-508.

共引文献8

同被引文献8

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部