期刊文献+

基于响应面法优化超声辅助提取青阳参苷元工艺 被引量:1

Optimization of ultrasonic-assisted extraction of Qingyangshengenin via response surface methodology
下载PDF
导出
摘要 以云南民间药用植物青阳参为研究材料,利用超声提取法处理,HPLC法检测,考察青阳参苷元提取率.基于单因素实验结果,对乙醇体积分数、超声温度、超声时间采用Box-Behnken实验设计和响应面法(RSM)优化提取条件,从而获得最佳提取工艺参数,即提取溶液的盐酸浓度0.36 mol/L、料液比1∶10(g/mL)、乙醇体积分数58%、超声功率600 W、超声温度63℃、超声时间33 min,验证提取得到产物青阳参苷元提取率0.2745%,实验结果与模型预测值接近,表明最佳工艺参数可行. The Yunnan folk medicinal plant Cynanchum otophyllum Schnei were used as materials,and the extraction rate of Qingyangshengenin were investigated by the ultrasonic extraction process and HPLC.Based on the single factor experimental results of ethanol concentration,ultrasonic temperature and ultrasonic time,Box Behnken experimental design and response surface methodology(RSM)were selected to further analyze and optimize the extraction conditions.The finnal extraction process was hydrochloric acid concentration 0.36 mol/L,solid-liquid ratio 1∶10(g/mL),58%ethanol,600 W ultrasonic power,63℃ultrasonic temperature and 33 min ultrasonic time.The optimum extraction rate of Qingyangshengenin was 0.2745%.The experimental results are close to the predicted values of the model,indicating that the optimal process conditions are feasible.
作者 梁蕾蕾 罗伊婷 徐逍宣 胡显光 李永菲 刘丹丹 LIANG Lei-lei;LUO Yi-ting;XU Xiao-xuan;HU Xian-guang;LI Yong-fei;LIU Dan-dan(School of Basic Medical Science,Kunming Medical University,Kunming 650500,Yunnan,China;School of Pharmaceutical Sciences and Yunnan Key Laboratory of Pharmacology for Natural Products,Kunming Medical University,Kunming 650500,Yunnan,China;Yunnan Institute for Food and Drug Control,Kunming 650000,Yunnan,China)
出处 《云南大学学报(自然科学版)》 CAS CSCD 北大核心 2022年第3期599-605,共7页 Journal of Yunnan University(Natural Sciences Edition)
基金 国家级大学生创新训练项目(202010678074).
关键词 青阳参苷元 青阳参 超声提取法 响应面法 Qingyangshengenin Cynanchum otophyllum Schnei ultrasonic-assisted extraction response surface methodology
  • 相关文献

参考文献7

二级参考文献25

共引文献29

同被引文献13

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部