基于SINS/RFID的隧道列车高精度定位方法

High-precision positioning method based on SINS/RFID for trains in tunnel

为了获取高速铁路列车在隧道这种导航卫星不可见环境下的定位信息,提出一种基于捷联惯性导航系统(SINS)和射频识别技术(RFID)的组合定位方法。通过响应时间模型来计算标签的定位精度,依据实际轨道环境增加标签对列车姿态校准的能力,同时结合惯性导航系统解算得到连续的定位数据。仿真结果表明:在30 km长的隧道利用射频识别标签位置信息进行校准,可以很大程度地减小惯性导航系统的误差积累,提高定位精度。引入姿态信息后,可以在陀螺仪性能与标签间隔的多种组合中保持隧道全线定位精度在米级,最高能够达到0.5 m。

based on strapdown inertial navigation system(SINS)and radio frequency identification(RFID),an integrated positioning method is proposed for the position acquisition of high-speed trains in satellite-denied environment such as tunnels.The positioning accuracy of RFID tags is calculated by the response time model.The tags could also calibrate the attitude by adding actual railway information.Setting RFID tags on tunnel wall and at the same time combining with inertial navigation system provide continuous dynamic positioning data.Simulation results show that utilizing RFID tags in position calibration significantly decreases the error accumulation of inertial navigation system and increases positioning accuracy in 30 km tunnel.After the addition of attitude information,the positioning accuracy of the whole tunnel railway maintains at the level of meters in a variety of combinations of gyroscope performance and RFID tag interval,the best of which is 0.5 m.