某新型高精度功分器加工技术

Machining technology of a new high precision power divider

下载PDF

导出

摘要针对某新型雷达功分器的加工难点进行技术分析,通过合理选择加工设备及装夹方式,保证了尺寸精度;通过调整切削参数、选用合理的刀具等措施,实现了无毛刺加工;通过焊接过程的把控,掌握了真空钎焊要领;通过堵头外加封蜡的方法,实现了多余物的控制,最终实现了该功分器的成功试制。

作者华巍王成黄君王勇张群 Hua Wei

机构地区安徽博微长安电子有限公司

出处《金属加工（冷加工）》 2022年第5期32-34,共3页 MW Metal Cutting

关键词高精度功分器无毛刺加工切削参数真空钎焊多余物控制

参考文献1

1张春燕,王贵成,裴宏杰,朱云明,曲海军.铣削毛刺的形成及其控制[J].工具技术,2007(7):58-62. 被引量：7
2L K Gillespie. Standards for burr. Proceeding of the 2nd ICPSF- BT. 1992, Dalian, China
3F Schafer. Product design influence on deburring. SME Tcchnical paper, MR75 - 483
4Schalfer T, Bohn L, Mayer J et al. Microstructure grooves with a width of less than 50 micro cut with ground hard metal micro end mills. Precision Engineering, 1999, 23/4: 229 - 235
5Wang Guicheng, Zhang Chunye. Machining theory and technology generating minimum cutting burrs. Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, Vol. 2,2002
6BO-LinHsu. Computer simulations on burr formation study [PHD]. University of Califofnia, Berkeley, 2002
7Tseng Pai-Chung, Chiou, Shean-Juinn and Chiou, I-Chen. The method of optimal cutting parameters design for minimizing burrs formation. Proceedings of the International Symposium on Precision Mechanical Measurements, 2002
8Simon S F Chang, Gary M Bone. Burr size reduction in drilling by ultrasonic assistance. Robotics and Computer-Integrated Manufacturing, 2005, 21 : 442 - 450
9Bissacco G, Hansen, H Net al. Micromilling of hardened tool steel for mould making applications, Journal of Materials Pro- cessing Technology, 2005, 167/2- 3:201 - 207
10岩田一明上田完次奥田孝一.走查型电子显微镜直接观察にょる°り生成机制の解析[J].精密机械,1982,48(4):94-99.

金属加工（冷加工）

2022年第5期

内容加载中请稍等...