摘要
针对一款铝合金挂车车架,利用HyperWorks对其进行了3种载荷分布、4种典型工况下的静力学分析,得到该车架在不同情形下的应力、变形分布,为车架优化建立了基础,并对挂车实际使用提出了建议。基于分析结果进行尺寸优化,在满足强度、变形的要求下达到了部件轻量化目的。
The static analysis of an aluminum alloy trailer frame under three load distributions and four typical working conditions is carried out by HyperWorks software, and the stress and deformation distribution of the frame are obtained in different conditions,which provides a basis for frame optimization and a reference for the practical use of the trailer. According to the analysis results, size optimization is carried out to meet the requirements of strength and deformation to achieve the purpose of weight reduction.
作者
刘恒
徐家川
张云
亓伟东
曹琳琳
李迪
孙秀美
Liu Heng;Xu Jiachuan;Zhang Yun;Qi Weidong;Cao Linlin;Li Di;Sun Xiumei(School of Transportation and Vehicle Engineering,Shandong University of Technology,Zibo City,Shandong Province 255049,China;Shandong Kehui Power Automation Co.,Ltd.,Zibo City,Shandong Province 255000,China;Shandong Xinneng Kungang Lightweight Equipment Manufacturing Co.,Ltd.,Zibo City,Shandong Province 255049,China)
出处
《农业装备与车辆工程》
2022年第5期125-131,共7页
Agricultural Equipment & Vehicle Engineering
关键词
挂车车架
铝合金
轻量化
尺寸优化
trailer frame
aluminum alloy
finite element method
size optimization
