电沉积3D打印增材制造原理与实现方法简述

Overview on Principle and Implementation Method of Electrodeposition 3D Printing Additive Manufacturing

随着科技的进步和经济的迅速发展,3D打印技术逐渐走进人们的生活,电沉积3D打印技术在微器件的加工制造方面得到了广泛关注。本文,首先从电沉积原理出发,结合赫尔槽试验现象,系统论述了不均匀沉积发生的试验现象和根本原因;其后,从“电沉积反应的临界点”的方面阐述了电沉积3D打印的实现原理;最后对现有关于电沉积3D打印技术的研究进行了简述。本文对定域性电沉积和电沉积3D打印相关理论的阐述及研究总结,将为定域性电沉积和电沉积3D打印技术的发展提供较好的指导作用。

With the progress of science and technology and the rapid development of economy,3D printing technology has gradually entered people’s lives,electrodeposition 3D printing technology has attracted widely in the processing and manufacturing of microdevices.Firstly,the paper based on the principle of electrodeposition and combined the experimental phenomenon of uneven deposition,secondly systematically discussed the experimental phenomenon and root causes of uneven deposition;After that,the realization principle of electrodeposition 3D printing is explained from the critical point of electrodeposition reaction.At the end of the paper,the existing research on the 3D printing technology of electrodeposition is briefly described.This paper elaborates the related theory of electrodeposition 3D printing and summarizes the study on the localized electrodeposition,It will provide an instructive meaning for the development of localization electrodeposition and electrodeposition 3D printing technology.