Effects of the electric field at the edge of a substrate to deposit a φ100 mm uniform diamond film in a 2.45 GHz MPCVD system

In this study,uniform diamond films with a diameter of 100 mm were deposited in a 15 kW/2.45 GHz ellipsoidal microwave plasma chemical vapour deposition system.A phenomenological model previously developed by our group was used to simulate the distribution of the electric strength and electron density of plasma.Results indicate that the electric field in the cavity includes multiple modes,i.e.TM_(02) and TM_(03).When the gas pressure exceeds 10 kPa,the electron density of plasma increases and plasma volume decreases.A T-shaped substrate was developed to achieve uniform temperature,and the substrate was suspended in air fromφ70 to 100 mm,thus eliminating vertical heat dissipation.An edge electric field was added to the system after the introduction of the T-shaped substrate.Moreover,the plasma volume in this case was greater than that in the central electric field but smaller than that in the periphery electric field of the TM_(02) mode.This indicates that the electric field above and below the edge benefits the plasma volume rather than the periphery electric field of the TM_(02) mode.The quality,uniformity and surface morphology of the deposited diamond films were primarily investigated to maintain substrate temperature uniformity.When employing the improved substrate,the thickness unevenness of theφ100 mm diamond film decreased from 22%to 7%.