摘要
正交胶合木滚动剪切性能是设计及应用正交胶合木结构的关键,也是目前该领域的研究热点之一。结合既有研究成果,对正交胶合木滚动剪切性能的影响因素、测试方法、破坏模式和数值模型进行总结分析,并对现阶段正交胶合木滚动剪切性能研究中存在的问题提出建议。
Rolling shear property of cross-laminated timber is the key to the design and application of cross-laminated timber structures,and it is also one of the current research hotspots in this field.Based on the existing research results,this paper summarized and predicted the factors influencing the rolling shear property of cross-laminated timber,the test method,the failure mode and the numerical model.And some suggestions on the existing problems in the research on the rolling shear property of CLT were put forward.
作者
丁文胜
刘佳宾
袁龙飞
许清风
于明昊
向家良
DING Wen-sheng;LIU Jia-bin;YUAN Long-fei;XU Qing-feng;YU Ming-hao;XIANG Jia-liang(School of Urban Construction and Safety Engineering,Shanghai Institute of Technology,Shanghai 201418,China;Shanghai Key Laboratory of Engineering Structure Safety,SRIBS,Shanghai 200032,China)
出处
《西北林学院学报》
CSCD
北大核心
2022年第3期217-222,245,共7页
Journal of Northwest Forestry University
基金
国家自然科学基金面上项目(51978402)。
关键词
正交胶合木
滚动剪切性能
试验方法
影响因素
数值分析
破坏模式
cross-laminated timber
rolling shear property
test method
influencing factor
numerical analysis
failure mode