摘要
基于氮气稳压基本原理,采用集总参数法开发了氮气稳压系统瞬态模拟程序,该模型突破了现有独立稳压器模型的局限,实现了一回路系统与氮气稳压器的直接耦合,并采用浮动式核电站氮气稳压系统试验数据对程序进行了验证。在此基础上,提出了一种基于敏感性分析的氮气稳压系统设计方法,与现有设计方法相比,该设计方法可以得到氮气稳压系统的优化配置方案,同时通过适配性设计,可以确保氮气稳压系统在启动过程中,压力不超过一回路系统温度压力限制曲线。
Based on the fundamental of nitrogen pressure stabilizing,the lumped parameter method is adopted to develop the nitrogen pressure stabilizing system transient simulation model,which breaks through the limitations of the existing independent stabilizer model,realizes the direct coupling between the primary loop system and the nitrogen stabilizer,and verifies the program with the test data of the nitrogen pressure stabilizing system of the floating nuclear power plant.On this basis,a design method of nitrogen pressure stabilizing system based on sensitivity analysis is proposed.Compared with the existing design method,this design method can obtain the optimal configuration scheme of nitrogen pressure stabilizing system.At the same time,through the adaptive design,it can ensure that the pressure of the nitrogen pressure stabilizing system does not exceed the range of the temperature and pressure limit curve of the primary loop system during the start-up process.
作者
闫新龙
李毅
罗涵禹
田野
Yan Xinlong;Li Yi;Luo Hanyu;Tian Ye(Nuclear Power Institute of China,Chengdu,610213,China;Science and Technology on Reactor System Design Technology Laboratory,Nuclear Power Institute of China,Chengdu,610213,China)
出处
《核动力工程》
EI
CAS
CSCD
北大核心
2022年第3期33-37,共5页
Nuclear Power Engineering
关键词
反应堆
氮气稳压
瞬态模拟
冷启动
Reactor
Nitrogen pressure stabilizing
Transient simulation
Cold start up