鞍千预选混磁精矿搅拌磨细磨—磁选—反浮选工艺研究

Research on Stirring Grinding-Magnetic Separation-Reverse Flotation Process of Preconcentration Mixed Magnetic Concentrate in Anqian

随着鞍千入选矿石性质的变化,原有的工艺流程暴露出一些问题,如重选精矿品位低、浮选尾矿损失大等。针对鞍千半自磨—湿式预选的混磁铁精矿,进行了详细的工艺矿物学研究,并确定了搅拌磨细磨—磁选—反浮选短流程工艺。研究结果表明,混磁精矿中铁品位为42.91%,主要含铁矿物为磁铁矿和赤铁矿,其他金属矿物为少量黄铁矿,赤铁矿和磁铁矿与脉石矿物结合形成的连生体含量较多,且在细粒级中分布率均较高;在此基础上确定了搅拌磨细磨—弱磁选—弱磁尾矿强磁选—强磁精矿一次粗选一次精选三次扫选的工艺流程,弱磁精矿和反浮选精矿合并得到的综合精矿TFe品位67.68%、回收率91.88%,综合尾矿TFe品位为8.83%。本研究对于鞍山式赤铁矿石流程的优化具有重要的指导意义。

With the change of ore properties in Anqian,the old process has exposed some problems,such as low grade of gravity concentrate,large loss of iron in flotation tailings and so on.A detailed process mineralogy study was carried out on the mixed magnetic concentrate of semi self-grinding-wet preconcentration in Anqian,and a short process of stirred mill-magnetic separation-reverse flotation was determined.The Fe grade of mixed magnetic concentrate was 42.91%,and the main useful minerals were hematite and magnetite,which were mainly in the form of medium and fine particles.The content of the intergrowths formed by the combination of hematite,magnetite and gangue minerals was high.On this basis,the technological process of stirring fine grinding-low-intensity magnetic separation-high-intensity magnetic separation for tailings in low-intensity magnetic separation-reverse flotation(one roughing,one cleaning and three scavenging)for concentrate in high-intensity magnetic separation was determined.The TFe grade and recovery of comprehensive concentrate obtained by combining weak magnetic concentrate and reverse flotation concentrate was 67.68%,91.88%,respectively.The TFe grade of comprehensive tailings was 8.83%.This study has important guiding significance for the optimization of Anshan hematite ore process.