摘要
针对汽车外饰件斜顶痕的问题,从斜顶在模板槽内的定位与导向设计及模具装配过程中的配模与杆长度调节等不同方面考虑,对塑件表面斜顶痕的形成类型进行分析,并对各种类型的斜顶痕在设计阶段和配模阶段的注意事项进行阐述,对表面喷漆的大型汽车外饰件的模具设计、钳工配模和后期模具生产维修提供指导作用。
Aimed at the angle lifter mark of automobile visible trim part, the forming types of angle lifter mark on product surface were analyzed from the different perspectives such as the location and guiding design of the angle lifter, and the fitting and the length adjust of the angle pin. The various types of angle lifter mark and matters for attention in the design stage and the fitting stage were explained. It had a good guiding role in mould design, fitting and repair.
作者
杨海天
YANG Hai-tian(Qingdao Higrade Moulds&Products Co.,Ltd.,Qingdao,Shandong 266111,China)
出处
《模具工业》
2022年第6期41-44,共4页
Die & Mould Industry
关键词
斜顶痕
压力痕
温差痕
外饰件
angle lifter mark
pressure mark
mark cause of temperature difference
visible trim part