First-principles calculations of the hole-induced depassivation of SiO2/Si interface defects

The holes induced by ionizing radiation or carrier injection can depassivate saturated interface defects.The depassivation of these defects suggests that the deep levels associated with the defects are reactivated,affecting the performance of devices.This work simulates the depassivation reactions between holes and passivated amorphous-SiO_(2)/Si interface defects(HP_(b)+h→P_(b)+H^(+)).The climbing image nudged elastic band method is used to calculate the reaction curves and the barriers.In addition,the atomic charges of the initial and final structures are analyzed by the Bader charge method.It is shown that more than one hole is trapped by the defects,which is implied by the reduction in the total number of valence electrons on the active atoms.The results indicate that the depassivation of the defects by the holes actually occurs in three steps.In the first step,a hole is captured by the passivated defect,resulting in the stretching of the Si-H bond.In the second step,the defect captures one more hole,which may contribute to the breaking of the Si-H bond.The H atom is released as a proton and the Si atom is three-coordinated and positively charged.In the third step,an electron is captured by the Si atom,and the Si atom becomes neutral.In this step,a Pb-type defect is reactivated.