摘要
针对LNG全容罐顶部外框架结构及侧面塔梯结构等,利用有限元软件ANSYS进行了详细的结构计算与分析。并根据GB 50009—2019以及GB 50017—2017标准中规定的工况和评定标准分别对外框架及塔梯结构的强度与稳定性进行了分析与比较,计算结果表明LNG全容罐顶部外框架结构及塔梯结构的安全性是满足要求的。
For the outer frame structure and ladder structure on the top and side position of LNG full containment storage tank,details structure calculation and analysis was carried by ANSYS finite element software.And according to the GB 50009—2019 and GB 50017—2017 standards specified in the operating mode and evaluation criterias,the strength and stability of the outer frame structure and ladder structure on the LNG tank were analyzed and compared.The calculation results shows that the safety of outer frame structure and ladder structure on the top and side position of LNG full containment storage tank can meet the requirements.
作者
杨阳
孟树森
张疆平
马金华
刘俊
樊志刚
YANG Yang;MENG Shusen;ZHANG Jiangping;MA Jinhua;LIU Jun;FAN Zhigang(Zhangjiagang CIMC Sanctum Cryogenic Equipment Co. , Ltd. , Suzhou 215632, China)
出处
《低温与特气》
CAS
2022年第3期31-34,41,共5页
Low Temperature and Specialty Gases
关键词
LNG全容罐
有限元计算
钢结构
LNG full containment storage tank
FEM calculation
steel structure