改性矿渣处理活性艳蓝KN-R染料废水的能力

Ability of Modified Slag to Treat Reactive Brilliant Blue KN-R Dye Wastewater

采用十二烷基三甲基氯化铵对高炉矿渣进行改性,制备一种低成本、环境友好型的吸附剂来处理染料废水,研究分析了吸附剂剂量、吸附时间、染料初始浓度和pH值因素对改性矿渣吸附活性艳蓝KN-R能力的影响以及改性矿渣表征的变化规律。结果表明:当改性矿渣用量为10 g/L,染料初始浓度为60 mg/L,pH值为2,以及吸附120 min时,改性矿渣对污水的处理后可达到较大脱色率96%,而在初始浓度为150mg/L时为较优溶度,该浓度下脱色率与吸附量均较高。通过XRD和FTIR实验对矿渣与改性矿渣的表征特点进行对比分析,分析表明十二烷基三甲基氯化铵可以有效地对矿渣进行改性,改性后的矿渣吸附能力得到了显著提升。

The blast furnace slag was modified with DTAC to prepare a low-cost and environment-friendly adsorbent for the treatment of dye wastewater.The study analyzes theadsorbent dose,adsorption time,initial dye concentration and pH value on the adsorption capacity of KN-R reactive brilliant blue from the modified slag,and the variation rule of characterization of the modified slag was also analyzed.The results show that when the amount of modified slag is 10 g/L,the initial concentration of dye is 60 mg/L,the pH value is 2,and the adsorption time is 120 min,the maximum decolorization rate of the modified slag can reach 96%,and the initial concentration of 150 mg/L is the optimal solubility,the decolorization rate and adsorption capacity are both high at this concentration.Through XRD and FTIR tests,the characterization characteristics of slag and modified slag were compared and analyzed.It was found that DTAC could better modify slag,and the adsorption capacity of modified slag was significantly improved.