基于物联网技术的船舶智能过闸收费系统研究

Research on Ship Intelligent Gate Crossing Charging System Based on Internet of Things Technology

船舶智能过闸收费系统的应用一定程度上推动了相关行业的发展与创新,同时也提升了工作的效率和质量,但是由于外部因素的影响,常常出现误差。因此,对基于物联网技术的船舶智能过闸收费系统进行研究。组建步进主控电路,接入过闸转接板,完成系统硬件设计;构建物联网智能拓扑扫描架构,同时,建立AIS智能收缴数据库,完成系统软件的设计。系统测试结果表明:经过4个测试小组的验证对比可知,船舶智能过闸收费系统的识别耗时均保持在0.2s以下,表明此系统的实际应用效果相对更好,识别误差较小,具有实际的应用意义。

The application of ship intelligent gate tolling system not only promotes the development and innovation of relevant industries to a certain extent,but also improves the efficiency and quality of work,but there are often errors due to the influence of external factors.Therefore,the ship intelligent gate toll collection system based on Internet of Things technology is studied.Set up the step-by-step main control circuit,connect it to the gate switching board,and complete the system hardware design;Build the intelligent topology scanning architecture of the Internet of Things,establish the AIS intelligent collection database,and complete the design of the system software.The system test results show that after the verification and comparison of four test teams,the identification time of the ship intelligent gate crossing charging system is kept below 0.2 s,indicating that the practical application effect of this system is relatively better,the identification error is small,and has practical application significance.