摘要
采用三聚氰胺甲醛(MF)对聚醋酸乙烯酯(PVAc)进行改性,将MF分别按质量分数0、1%、2%、5%、10%、15%及20%加入到聚醋酸乙烯酯乳液中,并对其胶膜进行各项性能研究。结果表明:通过MF对聚醋酸乙烯酯进行改性,能显著提高聚醋酸乙烯酯胶膜的耐水性和耐黄变性,其玻璃化转变温度性能也得到有效提高。当MF加入量为10%时,其各项性能达最佳。
Polyvinyl acetate was modified by adding melamine formaldehyde(MF)into PVAc emulsion by mass percentages of 0,1%,2%,5%,10%,15%and 20%respectively,and the properties of resulted films were tested.The results showed that the modification of polyvinyl acetate by MF could significantly improve the water resistance and yellowing resistance of polyvinyl acetate film,and the glass transition temperature of the film could be improved effectively as well.When MF was added by 10%,the various properties reached the best level.
作者
崔丽荣
崔峰波
章建忠
冉文华
张萍
袁向静
蒋斌兵
张志坚
Cui Lirong;Cui Fengbo;Zhang Jianzhong;Ran Wenhua;Zhang Ping;Yuan Xiangjing;Jiang Binbing;Zhang Zhijian(R&D Center of Fiberglass Research Institute of Jushi Group Co.,Ltd.,Tongxiang 314500)
出处
《玻璃纤维》
CAS
2022年第3期22-25,共4页
Fiber Glass
关键词
聚醋酸乙烯酯
三聚氰胺甲醛
改性
耐水性
耐黄变性
玻璃化转变温度
polyvinyl acetate
melamine formaldehyde
modification
water resistance
yellowing resistance
glass transition temperature