端面曲线式注胶封装系统设计

Design of end face curvilinear injection packaging system

随着现代化进程加快,塑料产业得到了飞速发展。目前,工业领域对塑料制品的需求日益增加,对塑料制品的质量要求越来越高,对注塑设备的要求也不断提高。而传统注塑设备体积大,生产效率低,因此,提出一种新型注胶系统,该注胶系统的熔融单元基于韦森堡效应进行设计,实现了热熔胶的自动排出。首先确立了新型系统的结构划分,其次确立了熔融单元的结构参数,最后建立了新型系统的实物模型。在实验验证中,提出的新型系统具有较好的稳定性;在产品生产环节,新型系统具有高达97%的生产合格率。较传统注塑设备,该注塑系统拥有操作简便、生产效率高以及产品精度高等优势,具有很高的市场价值及应用前景。

With the acceleration of the modernization process,the plastics industry has developed rapidly.At present,the demand for plastic products in the industrial field is increasing,the quality requirements for plastic products are getting higher and higher,and the requirements for injection molding equipment are also increasing.while the traditional injection molding equipment has large volume and low production efficiency.Therefore,the article proposes a new type of glue injection system.The melting unit of the glue injection system is designed based on the Weissenberg effect to realize the automatic discharge of hot melt glue.Firstly,the structure division of the new system is established.Secondly,the structural parameters of the melting unit are established.Finally,the physical model of the new system is established.In the experimental verification,the new system has good stability;in the production process,the new system has a production pass rate of 97%.Compared with the traditional injection molding equipment,the new equipment has high production efficiency,high product precision,stable performance,simple operation,and has high market value and application prospect.