摘要
Purpose–On-orbitservice technologyis one of the key technologies of space manipulation activities such as spacecraft life extension,fault spacecraft capture,on-orbit debris removal and so on.It is known that the failure satellites,space debris and enemy spacecrafts in space are almost all non-cooperative targets.Relatively accurate pose estimation is critical to spatial operations,but also a recognized technical difficulty because of the undefined prior information of non-cooperative targets.With the rapid development of laser radar,the application of laser scanning equipment is increasing in the measurement of non-cooperative targets.It is necessary to research a new pose estimation method for non-cooperative targets based on 3D point cloud.The paper aims to discuss these issues.Design/methodology/approach–In this paper,a method based on the inherent characteristics of a spacecraft is proposed for estimating the pose(position and attitude)of the spatial non-cooperative target.First,we need to preprocess the obtained point cloud to reduce noise and improve the quality of data.Second,according to the features of the satellite,a recognition system used for non-cooperative measurement is designed.The components which are common in the configuration of satellite are chosen as the recognized object.Finally,based on the identified object,the ICP algorithm is used to calculate the pose between two frames of point cloud in different times to finish pose estimation.Findings–The new method enhances the matching speed and improves the accuracy of pose estimation compared with traditional methods by reducing the number of matching points.The recognition of components on non-cooperative spacecraft directly contributes to the space docking,on-orbit capture and relative navigation.Research limitations/implications–Limited to the measurement distance of the laser radar,this paper considers the pose estimation for non-cooperative spacecraft in the close range.Practical implications–The pose estimation method for non-cooperative spacecraft in this paper is mainly applied to close proximity space operations such as final rendezvous phase of spacecraft or ultra-close approaching phase of target capture.Thesystem can recognizecomponents needed to be captureand provide the relative pose of non-cooperative spacecraft.The method in this paper is more robust compared with the traditional single component recognition method and overall matching method when scanning of laser radar is not complete or the components are blocked.Originality/value–This paper introduces a new pose estimation method for non-cooperative spacecraft based on point cloud.The experimental results show that the proposed method can effectively identify the features of non-cooperative targets and track their position and attitude.The method is robust to the noise and greatly improves the speed of pose estimation while guarantee the accuracy.
