空间目标自适应光学图像椭圆部件检测

Detection of elliptical components in adaptive optical image of space target

为了识别空间目标的椭圆部件,提出了一种基于自适应光学图像的椭圆检测方法。首先,利用RL(RichardsonLucy)方法对自适应光学图像进行复原,在此基础上,采用弧支撑线段(Arc-Support Line Segments,ASLS)方法对复原图像进行椭圆检测。针对ASLS算法使用的Canny边缘提取算法带来的“弧段过分割”和“语义信息差”等问题,提出了基于多尺度组合分组(Multiscale Combinatorial Grouping,MCG)边缘提取的解决方法。最后,针对ASLS算法使用优度指标等验证方法存在部分虚假椭圆的情况,综合利用多种几何指标进行约束,有效地消除了虚假椭圆。实验结果表明:椭圆中心点检测误差优于3 pixels,半长轴误差优于4 pixels,方向角误差优于3°。在重叠面积门限为0.65时,本文算法的准确率为85.7%、召回率为93.3%,F值指标为0.893,优于传统椭圆检测算法。

In order to identify the elliptical components of space target,an ellipse detection method based on adaptive optical image is proposed.Firstly,the RL(Richardson-Lucy)method is used to restore the adaptive optics image.Next,the Arc-Support Line Segments(ASLS)method is used to detect the ellipse of the restored image.To tackle the problems of“arc segment over segmentation”and“semantic information difference”caused by Canny edge extraction,an improved edge extraction algorithm based on Multiscale Combinatorial Grouping(MCG)is proposed.Finally,for some false ellipses produced by using verification methods such as goodness measurement,a variety of geometric constraint measurement are comprehensively used to effectively eliminate the false ellipse.The experimental results show that the detection error of ellipse center point,the semi-major axis error and the direction angle error are less than 3 pixels,4 pixels and 3degrees,respectively.When the overlap area threshold is 0.65,the accuracy rate of this algorithm is 85.7%,the recall rate is 93.3%and the F value is 0.893.Our method is better than the traditional ellipse detection algorithms.