摘要
温漂是影响电路系统稳定性和测量结果准确性的重要因素。本文通过选用低温漂的元器件以及设计温度补偿电路来减少温漂对项目的影响,通过方案验证:环境温度从(-20~40)℃变化,整个测温系统波动度控制在±0.05℃范围内。测试结果方法有效,且能够极大地减少温漂带来的影响。
Temperature drift is an important factor affecting the stability of circuit system and the accuracy of measurement results.In this paper,the influence of low temperature drift on the project is reduced by selecting low temperature drift components and designing temperature compensation circuit.The scheme is verified:the ambient temperature changes from(-20~40)℃,and the fluctuation of the whole temperature measurement system is controlled within±0.05℃.The test results show that the method is effective and can greatly reduce the impact of low temperature drift.
作者
王小路
李珊珊
吕茂超
WANG Xiaolu;LI Shanshan;LV Maochao
出处
《计量与测试技术》
2022年第6期26-28,共3页
Metrology & Measurement Technique
基金
江苏省市场监督管理局科技计划项目(苏市监科信[2020]16号,项目编号:KJ207541)
淮安市自然科学研究计划(淮财教[2020]322号,项目编号:HAB202080)。
关键词
温度
温漂
补偿
验证
temperature
temperature drift
compensate
verification