摘要
Aero-engine hollow turbine blades are work under prolonged high temperature,requiring high dimensional accuracy.Blade profile and wall thickness are important parameters to ensure the comprehensive performance of blades,which need to be measured accurately during manufacturing process.In this study,a high accuracy industrial computed tomography(ICT)measuring method was developed based on standard cylindrical pin and ring workpieces of different sizes.Combining ICT with cubic spline interpolation,a sub-pixel accuracy was achieved in measuring the dimension of component.Compared with the traditional and whole-pixel level image measurement method,the cubic spline interpolation algorithm has the advantages of high accuracy in image edge detection and thus high accuracy of dimensional measurement.Further,the technique was employed to measure the profile and wall thickness of a typical aerospace engine turbine blade,and an accuracy higher than 0.015 mm was obtained.
基金
financially supported by the National Science and Technology Major Project "Aero Engine and Gas Turbine"(No.2017-Ⅶ-0008-0102)
National Nature Science Foundation of China (No.51701112 and No.51690162)
Shanghai Rising-Star Program (No.20QA1403800 and No.21QC1401500)
Shanghai Science and Technology Committee (No.21511103600)
